Home Page
Become an Inspector
Infrared
Inspection Report
Mould Detection Dog
Mould Remediation
Preferred Realtors
Preparing for your Home Inspection
Pricing
Ready to Sell
Staging your Home
Testimonials
Training Centre
What we Inspect
Why Hire Us?

 

NOTE: When the real estate agents hire us for their friends and family, we must be doing something right!


Thank you very much for the quick report!

We are very happy with the quality of your work and will be recommending you to my clients in the future.

Kind regards,

Riina (Sales Rep) and Kevin

Get the Facts Before You Own Them™


Thanks a lot Rick, so nice of you for your prompt complete report.
My friend likes your professional approach and way you explain each and every thing.
ONCE AGAIN THANKS A LOT.

Irshad
Broker,


Thanks again for the fantastic job on the house, my father and Steve can't stop raving about how thorough you were, and how great it was to have the top-of-the-line equipment there. In the words of Steve, "I wish Rick did more so we could hire him for everything!"
We'll be recommending you to everyone who asks!

Natalie & Stephen

See all Testimonials.


Infrared & Mould Inspection is ALWAYS Included!

Pick an Inspection package that fits your NEW Home. Click Here.

Does your New home have ALUMINUM Wiring????? More

HRV (Heat Recovery Ventilator)

As building efficiency is improved with insulation and weather stripping, buildings are intentionally made more airtight, and consequently less well ventilated. Since all buildings require a source of fresh air, the need for HRVs has become obvious. While opening a window does provide ventilation, the building's heat and humidity will then be lost in the winter and gained in the summer, both of which are undesirable for the indoor climate and for energy efficiency, since the building's HVAC systems must compensate. HRV introduces fresh air to a building and improves climate control, while promoting efficient energy use.

 

Maintaining your HRV

Your heat recovery ventilator (HRV) can help make your house a clean, healthy living environment, while keeping fuel bills down. But your HRV can't do all this without your help.

It only takes seven simple steps to keep your HRV happy…

Step 1: Turn Off Your HRV
First, turn off your HRV and unplug it.

Step 2: Clean or Replace Air Filters
Dirty or clogged filters can lower ventilation efficiency. Try to clean your filters at least every two months. Filters in most new HRVs can be easily removed, cleaned with a vacuum cleaner, then washed with mild soap and water before being replaced. Older units have replaceable filters. If your HRV is easily accessible, this is a five-minute job.

Step 3: Check Outdoor Intake and Exhaust Hoods
Remove leaves, waste paper or other obstructions that may be blocking the outside vents of your HRV. Without this vital airflow, your HRV won't function properly. During winter, clear any snow or frost buildup blocking outside vents.

Step 4: Inspect the Condensate Drain
Check to see if your HRV has a condensate drain — a pipe or plastic tube coming out of the bottom. If it does, slowly pour about two litres of warm, clean water in each drain pan inside the HRV to make sure it is flowing freely. If there's a backup, clean the drain.

Step 5: Clean the Heat Exchange Core
Check your HRV owner's manual for instructions on cleaning the heat exchange core. Vacuuming the core and washing it with soap and water will reduce dust that can build up inside the core.

Step 6: Clean Grilles and Inspect the Ductwork
Once a year, check the ductwork leading to and from your HRV. Remove and inspect the grilles covering the duct ends, then vacuum inside the ducts. If a more thorough cleaning is required, call your service technician.

Step 7: Service the Fans
Remove the dirt that has been accumulated on the blades by gently brushing them. Most new HRVs are designed to run continuously without lubrication, but older models require a few drops of proper motor lubricating oil in a designated oil intake. Check your manual for complete instructions.

Your HRV should be serviced annually. If you are not comfortable doing it yourself, contact a technician accredited by the Heating, Refrigeration and Air Conditioning Institute of Canada (HRAI). Make sure the technician you call has been trained by the manufacturer of your HRV

Check Your HRV Balance: the Garbage Bag Test

HRVs need to be balanced, with the fresh air flow matching the exhaust flow. If you do not know if your HRV was balanced when installed or if you have changed or added HRV ducts, you may want to check the balance with the following simple procedure. This test will take about 10 minutes.

Use a large plastic bag, typically 1.2 m (48 in.) long. Untwist a wire coat hanger. Tape the wire to the mouth of the bag to keep it open. You now have a garbage bag air flow tester. Go outside to where your HRV ducts exit the foundation.

Step 1
Crush the bag flat and hold the opening tightly over the exhaust hood. The air flowing out of the hood will inflate the bag. Time the inflation. If the bag inflates in eight seconds or more, go to Step 2. If the bag inflates in less than eight seconds, turn your HRV to a lower speed, and repeat the test. Then go to Step 2.

Step 2
Swing the bag to inflate it and hold the opening against the wall around the HRV supply hood. The air going into the HRV will now deflate the bag. Time the deflation.

If your HRV is balanced, air going into the HRV will balance the air coming out of the HRV.

The inflation and deflation times should be roughly equal. If you find that the bag inflates twice as fast as it deflates, for instance, your HRV is unbalanced. If you can’t see a problem with the filters that would cause such an imbalance, you should call a service person to test and adjust your HRV.

Please don’t ignore your HRV! Just a little bit of your time is all it takes to keep it running smoothly.

See how our Infrared camera and moisture detection tools can help find moisture during a Home Inspection.......More


  Call or txt 519-572-7896 (Kitchener)  

Service areas, Acton, Brantford, Burlington, Cambridge, Elmira, Elora, Fergus, Guelph, Kitchener, Listowel, London, Milton, Mississauga, New Hamburg, Oakville, Paris, Rockwood, Stratford, Waterloo, Woodstock and surrounding areas.

Additional Services, Mould Inspections, Air Quality Testing, Odour Removal.

RICK CLAYTON OWNER/RHI CMI

REGISTERED HOME INSPECTOR

 

Contact us.

Rick Clayton RHI CMI

Registered Home Inspector

Certified Master Inspector

Ontario Building Code OBC-2006

Water Restoration Technician

Applied Microbial (Mould) Remediation Technician


In 2014 Rick Clayton became the third inspector in Ontario to have earned both the RHI & CMI status.

Book online

Call or TXT

519-572-7896


Our clients receive discounts from our sister companies listed below.


Selling your Home?

Have your Home looking it's best!

HowStagingHelps.com


Bad Odour in your Home?

Infloor heating

We can remove it with our Chemical Free Odour Removal process, Cigarette smoke smell, Cooking & Pets odours are gone.

GoodByeOdours.com


Mould Problems? We have all the tools, see our Mould Detection Dog in Action.

MouldDetectionDog.com



Download our Free Book. Over 200 pages.


Template


Book online